The NTS 03-G Plus is a fully customizable satellite reference clock. It meets the demanding precision and reliability requirements of the Power, Telecommunications and Enterprise sectors.
Multiple Ethernet ports support advanced PTP and NTP time synchronization solutions, while the high drive IRIG-B option delivers legacy device interoperability. This ruggedized platform brings ultimate reliability through Rubidium and OCXO oscillator options, and time sync redundancy through Parallel Redundancy Protocol (PRP) support.
Enhanced security is delivered through fully encrypted and authenticated configuration access. Multiple user accounts are supported with configurable access control. Independently addressable and logically isolated Ethernet ports allow multiple networks to be connected to the same clock without compromising the network security. SNMPv3 and built-in NTP amplification attack immunity coupled with IRIG-B and PTP support makes the NTS 03-G Plus a versatile synchronization solution.
| NTS 03-G + (3 Port) | NTS 03-G + (6 Port) | NTS 03-G + (4 Port) | |
Physical
Design: |
✔ | ✔ | ✔ |
|
Measurements: (W) 430 mm x (D) 270 mm x (H) 45 mm |
✔ | ✔ | ✔ |
| Weight | 2.0 Kg | 2.0 Kg | 2.0 Kg |
|
Display: 2-line x 16 character FSTN backlit display |
✔ | ✔ | ✔ |
|
LEDs: 2 LEDs indicating multiple statuses, including: Sync Status, Antenna cable fault, Satellite acquisition mode |
✔ | ✔ | ✔ |
GNSS Reciver |
|||
|
Type: L1, C/A code, 32 Channel Parallel-tracking receiver |
✔ | ✔ | ✔ |
| Frequency | 1598 Mhz | 1598 Mhz | 1598 Mhz |
| Sensitivity (Acquisition): | -155 dBm | -155 dBm | -155 dBm |
| Sensitivity (Tracking): | -160 dBm | -160 dBm | -160 dBm |
Oscillator - TCXO |
|||
|
TCXO (25°C) <±100 μs/4 hours (24-hours Aging) <±0.6ms/24 hours (24-hours Aging) |
✔ | ✔ | ✔ |
|
OCXO (25°C) <±5 μs/8 hours (48-hours Aging) <±10 μs/18 hours (48-hours Aging) <±10 μs/24 hours (7-days Aging) |
✔ | ✔ | ✔ |
|
Rubidium (25°C) <±1 μs/24 hours (7-days Aging) <±3 μs/72 hours (7-days Aging) <±10 μs/7 days (7-days Aging) |
✔ | ✔ | ✔ |
Network Time server option |
|||
|
Ethernet Ports: Copper - RJ45 10/100 BASE-T Ethernet Fiber - ST multi-mode fiber 100 BASE-FX Ethernet, 62.5/ 125 μm, λ 820 nm (available on Eth2 - Eth6) |
3 Ports | 6 Ports | 4 Ports |
| Accuracy: | <100 ns to UTC | <100 ns to UTC | <100 ns to UTC |
|
General - DHCP auto-configuration with fallback to ARP tested link-local address - VLAN packet tagging - Auto-MDIX - Auto-negotiate |
✔ | ✔ | ✔ |
|
NTP/SNTP Stratum-1 NTP & SNTP time server, Multicast & Broadcast server capability, Optional MD5 authentication. Supports NTP v1, v2, v3, v4 |
✔ | ✔ | ✔ |
|
PTP (IEEE1588 v2) Support - One or Two Step operation - End-to-End, Peer-to-Peer or manual delay calculations - Layer 2 (Ethernet) or Layer 3 (UDP) transport - Slave only mode - Default Profile support - Power Profile support (C37.238) - Telecom Profile support (Slave only - ITU G. 8265.1) - Telecom Profile support (Master/Slave - ITU G. 8275.1) - C37.238 TLV supported - Alternate Time Offset TLV supported with automatic or manual offset - C37.238 SNMP MIB supported |
✔ | ✔ | ✔ |
|
PRP - IEC 62439-3 (2016) - Redundant master clock - Fast failover slave - Supports up to two PRP pairs - PTP (IEEE 1588v2) Default & Power Profiles |
✔ (1 pair - Eth2 with Eth3) |
✔ (2 pairs - Eth2 with Eth3 & Eth5 with Eth6) |
✔ (1 pair - Eth2 with Eth3) |
|
SNMP V1,V2C & V3 support can be independently enabled; Configurable V1, V2C community names & security groups; Fully configurable via SNMP; V3 User-based Security Module (USM) support; USM authentication methods: MD5, SHA; USM privacy methods: DES, AES; USM MIB support |
✔ | ✔ | ✔ |
|
Notifications: SNMP trap generation V1, V2C & V3; SNMPv3 traps can be authenticated & privatised via USM; Syslog (RFC-3164 & 5424 verities |
✔ | ✔ | ✔ |
Inputs/Outputs |
|||
|
1 x Programmable Output: ESD protected, RS422 +-3.3 V output, 50 unit loads (3 Pin) DC IRIG-B (Un-modulated, DCLS) with selectable C37.118.1 and AFNOR S87-500 extensions, DCF77 time code, User defined pulses (1 to 1000 PPS) |
✔ | ✔ | ✔ |
|
1 x IRIG-B Input: DC IRIG-B (Un-modulated, DCLS) Extensions C37.118.1 ESD protected, RS422 ( -7 V to +12 V common mode range) 1/8th unit load (150 k Ω) Built in 120 Ω for optional termination (3 Pin) |
✔ | ✔ | ✔ |
|
4 x Programmable Outputs: DC IRIG-B (Un-modulated, DCLS) Extensions C37.118.1, AFNOR NF S87-500 User defined pulses (1to 1000 PPS) DCF77 simulation BNC: 5V TTL, 150 mA ST Fiber: TX (62.5/ 125 μm, λ 820 nm), compatible with multi-mode fiber |
✔ | ||
|
2 x Programmable Outputs: DC IRIG-B (Un-modulated, DCLS) Selectable AM IRIG-B (Modulated) Extensions C37.118.1, AFNOR NF S87-500 User defined pulses (1to 1000 PPS) DCF77 simulation DC IRIG-B: 5V TTL, 150 mA (BNC) AM IRIG-B: 7.2Vpp 120 ohm output impedance (BNC) |
✔ | ||
| Timing Accuracy | <100 ns to UTC | <100 ns to UTC |
<100 ns to UTC (DC IRIG-B) <2 µs to UTC (AM IRIG-B) |
|
Power supply alarms (Power A & Power B) Form A contacts (2 Pin) |
2 | 2 | 2 |
|
Antenna alarm: Form A contacts (2 Pin) |
1 | 1 | 1 |
|
Sync relay: Form A contacts (2 Pin) |
1 | 1 | 1 |
|
USB configuration port: Type B |
✔ | ✔ | ✔ |
Environmental/Electrical |
|||
|
Power supply options: Primary: - Low (14-36Vdc, 2 pin) - Med (20-75Vdc, 2 pin) - High (90-300Vdc, 2 pin) - AC (85-265Vac, IEC 320 Inlet) |
✔ | ✔ | ✔ |
|
Secondary: - Low (14-36Vdc, 2 pin) - Med (20-75Vdc, 2 pin) - High (90-300Vdc, 2 pin) - AC (85-265Vac, IEC 320 Inlet) |
✔ | ✔ | ✔ |
| Power Drain: | 12W - 28W max (depending on order options) | 12W - 28W max (depending on order options) | 12W - 28W max (depending on order options) |
| Operating Temperature: |
-10°C to +65°C -10°C to +60°C (Rubidium) |
-10°C to +65°C -10°C to +60°C (Rubidium) |
-10°C to +65°C -10°C to +60°C (Rubidium) |
| Humidity: | 10 to 95% RH (non-condensing) | 10 to 95% RH (non-condensing) | 10 to 95% RH (non-condensing) |
Programmability |
|||
|
Platform: Windows-based configuration software is available for download on www.tekron.com. Remote configuration over Ethernet includes the following user adjustable features: - Multi-level access control - Privacy & authentication methods equivalent to SNMP USM - “Supervisor-mode” prevents non-approved changes - Test mode - Commissioning tool |
✔ | ✔ | ✔ |
|
Timing & Synchronization: - Worldwide daylight savings and local time configuration. - Adjustable hold-over times - Antenna cable delay compensation |
✔ | ✔ | ✔ |
The antenna lightning protection kit affords additional protection through the use of an impulse suppressor installed in the antenna lead-in coax cable. In the event of a lightning-derived high voltage surge occurring on the coaxial cable, the impulse suppressor activates, short-circuiting the cable directly to the protection ground. Kit contents (all components required to install lightning protection are included): - Impulse Suppressor - Self-amalgamating tape - 2 x N-type Male crimp style connectors to match antenna cable - Crimp Tool to match the above connectors (RG59).
The antenna mounting bracket is an adjustable 500mm powder-coated steel bracket for securely mounting the timing optimized antenna option.
High performance CNT-240 cable, factory-fitted with a TNC-type male connector at one end, and a SMA male connector at the other. Cables are available in standard 15, 30, or 60 meter options. Contact our sales team if you require other custom lengths.
Dual GPS/GLONASS antenna radome that boasts exceptional out-of-band rejection, specifically designed for industrial/static timing environments. The antenna includes a pipe-mounting plinth that is designed to fit the antenna mounting bracket accessory.
Amennyiben bármely termékünk, szolgáltatásunk felkeltette érdeklődését, illetve ezekkel kapcsolatban kérdése, információ, tanácsadás iránti igénye lenne, az alábbi elérhetőségeken vegye fel velünk a kapcsolatot.
Cégünk az alábbi gyártók képviseletét látja el Magyarországon
